Heavy Duty Undercut Saw Kit

No. 835

This powerful saw undercuts walls, door jambs, doors, inside corners and most toe spaces. The 61/2" diameter No. 836 Carbide Tipped Steel Blade can fully undercut most doors in place and when used with the No. 805 Masonry Blade, can also be used for undercutting hearths. Height of cut is easily adjustable from flush to 1" above the floor with 3/32" graduations. The large height adjuster base helps prevent tipping and assures accurate, level cutting. Has a dual angle depth gauge which allows undercutting at a ‘straight on’ or 45° angle. Depth gauge is graduated in 1/8" increments with a 15/8" maximum depth of cut. Saw has a 7' 14/2 cord and is double insulated for safety. Guaranteed for one year.

Each Saw Kit includes:

• No. 805 Masonry Blade
• No. 836 Carbide Tipped Steel Blade
• No. 1812-P Blade Clamp (needed for use with the Nos. 805 Masonry Blade and optional 822 Diamond Blade)
• Saw, plastic carrying case, hex wrench for blade removal and instructions.

Features:

• Wide, cushioned cast aluminum handle that can be locked in three ‘full grip’ positions for better saw control
• Cutting height adjustment is done with two 3-arm knob screws and the setting can then be positively locked at the desired height by tightening two wing screws
• Dust port for a 11/4" vacuum hose is provided in the height adjuster base and accepts the No. 3-13-45-079-010 Step Adapter

Caution: Depth of undercut should not exceed wallboard thickness (generally 1/2") to avoid structural weakening caused by cutting nails, wall studs or sill plates, and to avoid blade damage by hitting nails.

---