For standard 36" x 60" shower areas with a centered drain, or custom shower areas where the drain is within 36" of each wall. Included in each package is one each Center Ring and 6 each Standard Float Sticks (1" to 1-3/4" taper x 36" long) that attach in any …

This is the Center Ring that is supplied in the No. QPK-101 Quick Pitch® Standard Kit to which the Standard Float Sticks attach. This center ring has a 3-5/8" inside diameter. Separate Center Rings are often needed to make use of ‘leftover’ Standard Float Sticks.

Quick Clips are designed to hold the Quick Pitch Standard and Extended Float Sticks in place for shower installations where the Center Ring is not required. These Clips can be used with the Schluter Kerdi Drain, Noble TS, Quick Drain Systems or any linear drain system. Quick Clips can be …

This patented clear plastic drainage disk is for placement around a drain opening in a shower floor. Designed to be positioned between the floor pan and the mortar laid over the floor pan. The ridges of the Positive Weep Hole Protector allow for drainage of water to the weep holes …

Pre-Pitch™ is a unique, stay in place screeding tool designed for use underneath shower pan liners. The first product to be installed, Pre-Pitch creates the proper sub floor pitch (1/4" per 12" run) needed to direct water flow towards the weep holes that are an integral part of …

Pre-Pitch™ is a unique, stay in place screeding tool designed for use underneath shower pan liners. The first product to be installed, Pre-Pitch creates the proper sub floor pitch (1/4" per 12" run) needed to direct water flow towards the weep holes that are an integral part of …

This Shower Seat is a heavy duty stay-in-place molded plastic form that is easily installed and can be tiled the same day. The Shower Seat is a standard 30" wide and has guide marks on the top surface to make it easy to trim the seat to 24" wide. The …

These Extended Float Sticks (1-3/4" to 2-1/2" taper x 36" long) attach to the 1-3/4" end of the Standard Float Sticks. They are for use in shower areas where the walls are more than 36" (but less than 72") from the floor drain. Sold 4 each per package.

The Kirb-Perfect Shower Curb is a stay-in-place plastic form for building perfect shower curbs. Kirb-Perfect is designed to be used with a pan liner. It can be used with or without a 2 x 4 wood curb. With molded in dovetail connecting lugs, this curb can be used for …

The Handi-Kirb™ Shower Curb is a stay-in-place plastic form for roll-in, wheelchair accessible shower curbs where recessing the compartment floor is not possible or practical. Handi-Kirb has molded in dovetail connecting lugs to accommodate any size shower opening and can be used with either a liquid or sheet pan liner …